Hard Rock Crawlers of Southern Maryland  

Go Back   Hardrockcrawlers > User Forum > For Sale / Wanted

Reply
 
Thread Tools Display Modes
  #1  
Old 03-09-2017, 09:42 AM
dcdunlimited dcdunlimited is offline
Junior Member
 
Join Date: Nov 2014
Posts: 7
dcdunlimited is on a distinguished road
Default Dana 30, Dana 44 and used OEM parts for 13 JKU

Selling a bunch of brand new Dana 44 front, Dana 30 front and Dana 44 rear parts that were going into a 2013 JKU build or coming off as part of that same build. Below is the list and the prices, a little flexibility if you buy a bunch of stuff but otherwise I am sending everything back next week. Prices are my cost less the restocking fee I will have to pay.

There are several people in the group and others outside that are also looking at these parts, first person with cash wins and preference to packages will take preference. All parts, not still attached to my Jeep, can be viewed starting tomorrow afternoon. Installation of parts can also be discussed, I can talk to the installer doing my build about putting parts together. Send me PMs with any questions, offers, picture requests of the used parts or part numbers.

New in the box:
- Dana Rubicon 44 0 mile Mopar front axle (4.10 stock gears and elocker, no shafts) - $2,500
- Synergy 30/44 Inner C Gussets $60
- Dana 4.88 Gear Set for Dana 44 front $160
- Dana 4.88 Gear Set for Dana 44 rear $160
- Dana 4.88 Gear Set for Dana 30 front $160
- RCV Axle Tube Seals for Dana 30/44 $110
- Front EBC Green Stuff break pads $55
- Rear EBC Green Stuff break pads $45
- Adams 1310 Front Driveshaft for 3.5 lift $410
- Synergy Inner Axle Sleeves $95
- ARB Locker Dana 44 front $810
- Dynatrac Prosteer Ball Joints, upper and lower both sides $425
- Racing Knuckles left and right $500 for set
- RCV Spline Axle Shaft Kit, left and right shafts $1,150
- Timken Master Differential Kit Dana 30 $85
- Timken Master Differential Kit Dana 44 $85
- ARB Traction Pack Locker Kit (Dana 30 front and Dana 44 rear lockers, air compressor, tire inflation kit, key chain, hat and synergy under hood compressor mount bracket) $1,700
- Artec weld-on drag link flip bracket $50

Used, 45k miles wheeled once:
- Dana 30 front open diff 3.21 gears including breaks wheeled once $500
- Dana 44 front open diff 3.21 gears including breaks wheeled once $500
- 8 OEM control arms, uppers and lowers all the way around $200
- OEM Drag link $50
- OEM tie rod $50

Bought used have since put 5k miles
- 5 Tuff AT 01 rims with 33x12.5x18 Nitto Mud Grapplers $600 (spare is in need of replacement as is one of the rear tires, but 2 tires and you are all set)
__________________
David
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 04:14 PM.


Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Contents Copyright Hardrockcrawlers of Southern Maryland